Gravel
Moots Routt CRD
2026 · 700c wheels · 7 sizes
Race-geometry titanium gravel frame built from Moots' lightest RSL tube set, with a Moots carbon gravel fork routing the brake line through the stem, UDH dropouts, a T47 bottom bracket and clearance for 45 mm tyres. Tyre size is from Moots' SRAM Force XPLR E1 complete build, which does not list stem length or bar width by size. Moots prints the size 55 effective top tube as 555.0 cm, an obvious typo for 55.5 cm, which is used here. Standover is published in inches and has been converted. Moots does not publish the fork offset for this fork. Moots does not publish fork offset or trail for this bike. The offset used here (49 to 50 mm) is an estimate: where Moots publishes enough of the geometry it is worked out from those numbers, otherwise it is the typical published offset of other bikes of the same type with a similar head angle. Stability and steering results for this bike depend on it, so treat them as approximate.
Source: moots.com/products/routt-crd
Size run
Published geometry by size. How each size rides and fits for your rider profile loads with the page.
| Size | 50 | 52 | 54 | 55 | 56 | 58 | 60 |
|---|---|---|---|---|---|---|---|
| Stack (mm) | 575 | 585 | 594 | 603 | 615 | 624 | 644 |
| Reach (mm) | 362 | 362 | 372 | 374 | 379 | 398 | 405 |
| Head angle (°) | 71.0 | 71.0 | 71.5 | 71.5 | 71.5 | 72.0 | 72.3 |
| Seat angle (°) | 75.0 | 74.3 | 74.0 | 73.5 | 73.5 | 73.0 | 72.8 |