Road race

Condor Paris Galibier

2020 · 700c wheels · 5 sizesUnverified

A rim-brake steel frameset that recreates the classic Paris Galibier, first introduced in 1947. The frame is Columbus SLX apart from its distinctive twin top tubes, with a 1 inch threaded steel fork, and it takes tyres up to 25 mm. Condor sizes it by the seat tube measured centre to top. The 49 to 61 cm figures come from Condor's 2020 geometry chart. The 64 cm size is listed only on the product page, which gives no reach or bottom bracket height for it. The product page table has two typos: a 79 degree head angle for the 49 cm and a 58.5 cm stack for the 52 cm. The geometry chart gives 69 degrees and 48.5 cm, and those are the values used here. Condor does not publish the fork rake. Condor does not publish fork offset or trail for this bike. The offset used here (47 mm) is an estimate: where Condor publishes enough of the geometry it is worked out from those numbers, otherwise it is the typical published offset of other bikes of the same type with a similar head angle. Stability and steering results for this bike depend on it, so treat them as approximate.

Source: web.archive.org/web/20241221195118/https://static.condorcycles.com/docs/Condor_Geometry.pdf