Road race
Condor Classico Road
2020 · 700c wheels · 5 sizes
Lugged Columbus SLX triple-butted steel road frame with a 1 inch threaded steel fork, rim caliper brakes and clearance for tyres up to 25 mm. The Classico Stainless, which pairs an SLX front with a stainless rear triangle, shares this geometry. Reach figures come from Condor's 2020 geometry chart. Seat tube is measured centre to top (centre to centre is 2 cm shorter). On the 58 and 61 cm sizes Condor's published reach does not agree with its own top tube, stack and seat angle, which suggest a reach of about 390 mm and 396 mm, so treat those two reach figures with caution. Condor does not publish fork offset or trail for this frame. Condor does not publish fork offset or trail for this bike. The offset used here (45 to 48 mm) is an estimate: where Condor publishes enough of the geometry it is worked out from those numbers, otherwise it is the typical published offset of other bikes of the same type with a similar head angle. Stability and steering results for this bike depend on it, so treat them as approximate.
Source: www.condorcycles.com/products/condor-classico-road-frameset
Size run
Published geometry by size. How each size rides and fits for your rider profile loads with the page.
| Size | 49 | 52 | 55 | 58 | 61 |
|---|---|---|---|---|---|
| Stack (mm) | 485 | 510 | 537 | 557 | 585 |
| Reach (mm) | 385 | 383 | 381 | 406 | 402 |
| Head angle (°) | 71.5 | 72.0 | 73.0 | 73.0 | 73.0 |
| Seat angle (°) | 75.0 | 75.0 | 74.0 | 73.5 | 73.0 |